Industrial motors IE4 Series Motor
IE4 Series motors are cage induction motor designed in accordance with IEC standards and IE4 energy efficiency。
Specification
| Standard | IEC60034-30-1 |
| Frame Size | H80-450MM |
| Rated Power | 0.75KW-1000KW |
| Degrees or Energy Efficiency | IE4 |
| Voltage and Frequency | 400V/50Hz |
| Degrees of Protections | IP55 |
| Degrees of insulation/Temperature rise | F/B |
| Installation Method | B3、B5、B35、V1 |
| Ambient temperature | -15°C ~+40°C |
| Relative humidity should be less than 90% | |
| Altitude should be lower than 1000 m above sea level | |
| Cooling Method | IC411、IC416、IC418、IC410 |
Packaging
Ordering Information
● This catalogue is only a reference for users. Please forgive that if any change ofproducts will not make additional specify in advance.This catalogue is only a reference for users. Please forgive that if any change ofproducts will not make additional specify in advance.
● Please note the rated data when ordering, such as the motor type,power,voltage, speed, insulation class, protection class, mounting type and so on.
● We can design and produce special motors as followed according to therequirement of customer:
1. Special voltage, frequency and power;
2. Special insulation class and protection class;
3. With terminal box on the left side, double shaft ends and special shaft;
4. High temperature motor or low temperature motor;
5. Used on plateau or outdoor;
6. Higher power or special service factor;
7. With heater, PT100 for bearings or winding, PTC and so on;
8. With encoder, insulated bearings, or insulated bearing structure;
9. With others requirement.
